[DML] Re: high rpm idling

["DMC Joe" <dmcjoe@xxxx>]

Try removing the top front section of the intake manifold and clean the
throttle plates with carb spray and apply lubricant to the pivot points.

DMC Joe / De Lorean Services / <dmcjoe@xxxx>

Web Site: <www.deloreanservices.com>
----- Original Message -----
From: <Deloreanernst@xxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Monday, February 28, 2000 9:19 PM
Subject: [DML] Re: high rpm idling


> In a message dated 2/23/00 2:20:04 AM Eastern Standard Time,
> Deloreanernst@xxxx writes:
>
> << When in neutral, my 5 speed idles very high, >>
>
> I tried lubricating both the ends of the cable while moving it in and out,
as
> well as the linkage at the pedal, and all the geegaws back to and
including
> the microswitch, which has a nice on-off click as the pedal is worked. It
> seems to work real smoothly. I used white lithiuim spray grease. But no
> improvement. Could it be something else, like the idler motor? Mine
looks,
> on the outside at least, like it spent the last 18 years underwater with
the
> body dies off of Ireland.
>
> -Wayne A. Ernst
> "Living the dream!"
> VIN...11174