[DML] Re: Misfire after cold start.

["DMC Joe" <DMCJOE@xxxx>]

Check to be sure that the electrical and vacuum hose connections at the
warm up regulator are correct and working.

DMC Joe / DeLorean Services / <dmcjoe@xxxx>
Web Site: <http://www.deloreanservices.com>

----------
From: Graham Wells <gwells@xxxx>

Apart from one occasion when there was a real reluctance to start when
cold, starting has mostly been OK. However, until the engine has run for 2
or 3 minutes, there is a misfire problem on any load or acceleration which
seems to me, as a novice to fuel injection, to be similar to over use of
the choke on a carburettor based engine. I feel sure it is an excess of 
fuel causing the problem, but it does appear to go away after a few
minutes. I have checked the cold start injector which does not appear to be
leaking excess fuel into the system. Does anyone have any other ideas?



Graham gwells@xxxx
VIN 17152