[DML] Re: Hood "Edging strips"

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

Get some 3M trim adhesive or some Liquid Nail. Use it sparingly as it
is difficult to clean up th excess.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Dani B" <5n-@xxxx> wrote:
> Does anyone have any tricks with keeping those long plastic hood
> "Edging strips" on? Mine keep on falling off every time I close the
> hood or they will sag in some areas and stay on in others. These are
> new, installed April. I used a hammer to tap them on so the
> glue/cement or
> whatevers in the middle would have good contact all around the edge of
> the metal-thought with this method there would be no way for them to
> fall off. Held out for a little while but not anymore. The glue or
> whatever stuff in the center didn't quite work
> to well...Any suggestions? Thanks -Dani B. 5003




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/