Re: [DML] Hood "Edging strips"

["Michael Paine" <mpaine@xxxxxxxxxxxxxxxx>]

I purchased a set from a vendor at DCS that are rubber covered metal... 
they hold on REALLY well. Re: the vendor, I had never heard of them 
before. They were located (if you are walking around the vendor room 
starting at the DMCH car, past DMCH turning right at the end of their 
tables they were the next vendor. They also had an interesting cat heat 
shield they had made.

Hope someone can shed more light on this.

regards,

Michael

 > Does anyone have any tricks with keeping those long plastic hood
> "Edging strips" on? Mine keep on falling off every time I close the
> hood or they will sag in some areas and stay on in others. These are
> new, installed April. I used a hammer to tap them on so the
> glue/cement or
> whatevers in the middle would have good contact all around the edge 
> of
> the metal-thought with this method there would be no way for them to
> fall off. Held out for a little while but not anymore. The glue or
> whatever stuff in the center didn't quite work
> to well...Any suggestions? Thanks -Dani B. 5003
> 
> 
> 
> 
> To address comments privately to the moderating team, please address:
> moderators@xxxxxxxxxxx
> 
> For more info on the list, tech articles, cars for sale see 
> www.dmcnews.com
> 
> To search the archives or view files, log in at http://
> groups.yahoo.com/group/dmcnews 
> Yahoo! Groups Links
> 
> 
> 
>  
> 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/