RE: [DML] engine wont runs

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Yan, Coming off the bottom right terminal of the resistor coil should be
about 9 to 12 volts going to the ( - ) side of the coil when cranking. If
that isn't there then you will have no spark because there isn't enough for
voltage for the coil to work with. Check that and let us know.
John Hervey
www.specialTauto.com



-----Original Message-----
From: delorean6584 [mailto:carburateur100gaz@xxxxxxx]
Sent: Thursday, July 22, 2004 12:07 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] engine wont runs


my delorean refuse to start today...so i checked some points...the
fuel is comming but there is no fire at all, i tried another bosch
coil didnt work either, i put a spark plug wire and a spark plug
directly on the coil and checked the fire, it does a spark when i
put the key to on position and another one when i put it to the off
position, but when cranking the engine it doesnt sparks... my best
bet would be the resistor or ecu any hints of what to check and how

thanks
yan
vin 6584 * Milla *




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/