[DML] Re: mode switch vacuum disappeared

["content22207" <brobertson@xxxxxxxxxxxx>]

That hard plastic line itself can crack. Mine did (replaced it with
fuel line hose).

Line goes to a vacuum canister inside the driver's pontoon, thence
through a grommet to a Tee at the passenger intake rail (other side of
that Tee goes to the brake booster). Vacuum canister is accessed by
removing the charcoal canister then pulling it out the same access
panel (is held in by those two 5/16-24 nuts on the diver pontoon. Use
1/2" wrench to remove). 

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "sweitzel_2000" <sweitzel@xxxx> wrote:
> Within one day, overnight, it seems like all vacuum to my mode switch 
> has vanished. Everything is correct at the switch, and all the hoses 
> are still attached going from the front on back under the center 
> console. Symptoms - no more 'hiss' (yes, i haven't rebuilt my 
> diphragm yet) also, very easy to turn the switch, and obviously 
> barely any airflow from the vents. Where in the back of the car does 
> the hard plastic vacuum tube go next? is there any particular 
> fittings that are known to come apart?
> 
> -sean #3231




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/