RE: [DML] Diagnosing my delorean

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

I wouldn't take it apart. If you mix up the shims and parts in the chambers
it's much more work for someone like us/rebuilders to put it back together.
Also, it will most likely leak and you don't have any way to check the flow
and pressure test. That is a part that should be left up to the
professional.
John



-----Original Message-----
From: jmlaux83 [mailto:jmlaux83@xxxxxxxxx]
Sent: Thursday, June 03, 2004 5:46 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Diagnosing my delorean


> Yea, I think thats the problem too. I took off my fuel distributor
> last night and I can't even move the plunger up and down with my
> finger. Now I need some instructions on taking apart the distributor.
> I was able to take off the brass nut in the middle of the distributor
> with a crecent wrench but that is as far as I got. where do I go from
> there? Also since I have this part off should I also claen and
> replace the 0-rings in the pressure regulator? Or do you think it is
> wise to just deal with one problem at a time? Thanks for the help
> John!
> 
> Jason
> 2256

[long quote trimmed by moderator]



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/