[DMCForum] STEERING RACK BREAKDOWN
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] STEERING RACK BREAKDOWN



I've got an old steering rack that I'm rebuilding and have question that has me stumped.  Starting on the outside you've got the tie rod ends, then the tie rod, then a large "nut" (for the lack of a better name) which connects the tie rod to the "steering drive bar".  This "nut" is located under the boot on each side.  How do you remove this nut?  There is a pin of some sort inserted into the "nut" in the center of the groove of each one.  They do not have a head on them for either a Phillips, Straight Slot, or Allen, so is this a tight fitting pin that needs to be drilled out or what?  Any help would be appreciated.

Mike   TPS   1630


      


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/DMCForum/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:DMCForum-digest@xxxxxxxxxxxxxxx 
    mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated