[DMCForum] Re: Who has dampening door struts?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Who has dampening door struts?

Well, here's the deal: My torsion bars were cranked up a lot when I
bought the car. I turned 'em way down, just enough to perfectly
balance the doors and have them gently stop at the top on their own
without bouncing.

Unfortunately, this made my launchers completely unreliable. If I
crank the bars up one more notch, they won't be putting too much
stress on anything, but my launchers will work well again. As it is, I
think my torsion bars are turned down lower than most.


On 4/12/07, DOCTORDHD@xxxxxxx <DOCTORDHD@xxxxxxx> wrote:
> Ryan,
> You may want to consider using a door popper instead.  Cranking up the
> torsion bar will be putting more stress on the bar as well as its supporting
> structures.
> Dave Delman
> ************************************** See what's free at http://www.aol.com.

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN 

Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive