[DMCForum] Craig Radio Display Problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Craig Radio Display Problem

I'd like to fix the all too common problem with the "dissappearing 
digits" on the original and otherwise working Craig radio that I 
recently reinstalled into 1662 after 10 years or so sitting in a box in 
the closet.  For those who've done so before, is it usually just a case 
of resoldering the connections between the flat flex cable and the 
circuit boards (relatively easy), or does the actual flex cable itself 
tend to go bad and have to be completely removed and replaced (which 
I'm assuming would be much harder to do, not to mention sourcing a 
suitable replacement.)  I'd love a bit of advice from someone in the 
know before taking it back out of the car and opening it up.  I want to 
get the full display working again before going to the show in 
Celebration next month, but if the job will be too difficult I might 
just leave it as it is.

*****WhoCruiser@xxxxxxx is Dan Harris*****
WhoCruiser's Personal Home Page: http://members.aol.com/WhoCruiser
Read about The Sci-Fi Sea Cruise at: http://www.scificruise.com
Purr-use The Cat House at: http://members.aol.com/LookAtMyCatsPage

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive