[DMCForum] Trunk latch captive nuts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Trunk latch captive nuts

I did a search and could not find anything about this.

I was getting gas one day and noticed that one of the bolts that hold the 
trunk latch onto the fiberglass was hanging out. It soon became evedient 
that the captive nut was no longer "captive" so there was nothing for the 
bolt to screw into.

After about 2 hours of poking around and carfully trying to reach the area 
where the captive nut should be from inside I finally gave up.

I am guessing there is no easy way to fix this, would anyone know the best 
way get at this area? I stopped short of pulling the glove compartment but 
that would be my next step.


Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN 

Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive