Re: [DMCForum] Hmm....
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Hmm....



You -can- put 15lbs of boost into a PRV, as long as it has an engine 
code beginning Z7U, or Z7X-723 <grin>

Someone recently reported his results on the Alpine forum. A stock GTA 
V6 Turbo with slightly modified turbo and a chargecooler in additon to 
the intercooler, re-mapped with a new ECU rustled up a thumping 
333ft-lbs of torque at 3000rpm. That's better than a Venturi Atlantique 
300! Power still peaked at 250hp though.

The pistons are indeed very different, however the rings are only 0.5mm 
fatter.

http://www.delorean.co.uk/turboarticlepics/pistons.jpg

Martin

timnagin wrote:

> >Put 15 pounds of boost into a PRV and you will end up with with a big
> >box of Volvobits cereal that stays very, very crunchy in milk.
>
> ...and does not contain your recommended daily allowance of iron :)
>
> Greg
>
> <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
>
>
>  




[Non-text portions of this message have been removed]



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive