[DMCForum] Lower ball joint replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Lower ball joint replacement



I need to replace a lower ball joint and want to take on this project 
myself instead of having a mechanic do it. I'm familiar with the process 
and all, but was wondering if anybody has done it with the lower control 
arm still attached to the D. I can rent a ball joint press to remove the 
old one and press in the new one, but I'm not sure if it will fit in the 
area with the knuckle still attached at the upper ball joint. Removing the 
lower control arm for clearance is a lot more work I would like to avoid if 
I can.

So if you've done it, any feedback would be greatly appreciated. Thanks,

Chris
VIN 4099



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive