RE: [DMCForum] Re: Torque Settings........
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Re: Torque Settings........


We did this on a few local cars during my door removal party.  It's been so
long now I don't recall the torque setting but I don't think it was very

We tightened them until they were snug and on several cars they were loose.
I will ask some of the people who were there and see if they remember.


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Mike Bosworth
Sent: Tuesday, June 20, 2006 9:45 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: Torque Settings........

No one got any idea on this ??.... i know its not a 'hot topic' but 
i would rather set these up correctly than just 'ugg' them up 
tight :)



--- In DMCForum@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@...> 
> Hi All
> Sorry i know i have posted this on the DML but can anyone on here 
> help ?
> Im dammed if i can find these settings in my manual, has anyone got
> any idea as to a torque setting for these.
> 108330 Engine CROSSBRACE to frame bolts
> Fibreglass Underbody to frame bolts
> Thanks for any help
> Regards
> Mike
> #2001

------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive