Re: [DMCForum] Re: removing side skirts pain?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: removing side skirts pain?



The problem is not the bolts themselves but the fact that if you do 
manage to turn them, you'll spin the rivnuts in their holes. If you snap 
them off, you'll have to drill out the rivnuts. It's the old 
steel-in-ally argument.

I'm not recommending this but we cheated on 2727 (that's a friend's car, 
not a customer's!) and drilled a set of new holes halfway between the 
old ones, and installed new rivnuts.

Martin

Ryan Wright wrote:

>Ah, OK. Those are nice. I may have to buy me a set.
>
>As far as those rusted bolts go... have you tried PB Blaster?
>
>-Ryan
>  
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive