RE: [DMCForum] RE: compression tester...

["timnagin" <timnagin@xxxxxxxxxxxxxx>]

That sounds more like what I was told.  Thanks, Dave.  So does anyone know
what the cylinders should hold?  Yes, I have the manuals just curious what
others have found.

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of doctorDHD@xxxxxxx
Sent: Tuesday, January 17, 2006 8:03 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] RE: compression tester...

As far as I know there are two basic types of testers.  One with a conical 
rubber tip that you have to push and hold in the spark plug hole and one
with a 
metal thread that screws in like a spark plug.  This kind has a rubber O
ring 
to help seal it.

I suggest the screw in type.

Dave Delman
aka D2 & 6530

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---