RE: [DMCForum] Grinding in reverse...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Grinding in reverse...



That's exactly what I was thinking.  We did a complete brake upgrade on a
local owner's car and the driver's front rotor was stuck on the car.  When
it was finally forced off the bearing fell in pieces to the garage floor.

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Chris Almy
Sent: Sunday, January 08, 2006 12:54 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] Grinding in reverse...

I had a similar problem, but going forward. Once I replaced the front
bearings, the car now drives straighter too! When I pulled the old ones
off, one of the bearings on the problem wheel completely separated! I think
water managed to get in and cause the bearing to fail.

Chris
VIN 4099

At 12:30 PM 1/8/2006 -0500, you wrote:
>When you had that tire off the ground, did you wiggle the tire to see if
>there was any play in the bearing?
>
>Greg



YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN 


Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive