Re: [DMCForum] Alternator belt

["Videobob Moseley" <videobob@xxxxxxxxxxx>]

If you ever have a stuck nut, you need to get one of two things,
an asian massage girl,....or some stuff called PB Blaster.
They sell it at Wal-Mart.
Spray this on any nut and it will melt the rust right off it.

Once you put your new belt on, use a large crow bar or
super long screw driver to create some leverage and push the
alternator so that it is super tight and then tighten the bolt.
Usually this is a two man job.....unless you went out and got
the little asian massage girl and then she can help you.
You will have your car fixed and a happy ending!
Rub-n-tug.

- Videobob

>From: DMCVIN6683 <dmcvin6683@xxxxxxxxx>
>Reply-To: DMCForum@xxxxxxxxxxxxxxx
>To: DMCForum@xxxxxxxxxxxxxxx
>Subject: Re: [DMCForum] Alternator belt
>Date: Tue, 5 Jul 2005 12:47:22 -0500
>
>Pour a little Flat Tire on it, that nasty beer will loosen the nut .
>
>You have to loosen the nut on the back of the bolt first. If you are
>lucky you might be able to push the alternator down a little to get the
>belt on and then push it up to tighten it but i doubt that will work
>but you can try.
>
>Mark V
>
>
>
>On Jul 4, 2005, at 11:22 PM, usndmc wrote:
>
> > Hi all,
> >
> > My alternator belt broke on my way back to town today. My alternator
> > is the original Motorola. I have been trying to put the new one on;
> > from what I understand you have to loosen the 2 bolts on the sliding
> > bracket, and then loosen the big bolt that goes through the top where
> > the alternator is mounted to the engine. I cannot get the nut on the
> > end of the big bolt to budge from the bolt. I can't slide or pivot the
> > alternator at all, is there any possible way to get the belt on
> > without loosening that big bolt on top? Really need to get a new one
> > on so I can drive to work tomorrow. Appreciate any help, Happy 4th
> > everyone.
> >
> > Dave
> > #5968
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---