Re: [DMCForum] Alternator belt

[DMCVIN6683 <dmcvin6683@xxxxxxxxx>]

Pour a little Flat Tire on it, that nasty beer will loosen the nut .

You have to loosen the nut on the back of the bolt first. If you are 
lucky you might be able to push the alternator down a little to get the 
belt on and then push it up to tighten it but i doubt that will work 
but you can try.

Mark V



On Jul 4, 2005, at 11:22 PM, usndmc wrote:

> Hi all,
>
> My alternator belt broke on my way back to town today. My alternator
> is the original Motorola. I have been trying to put the new one on;
> from what I understand you have to loosen the 2 bolts on the sliding
> bracket, and then loosen the big bolt that goes through the top where
> the alternator is mounted to the engine. I cannot get the nut on the
> end of the big bolt to budge from the bolt. I can't slide or pivot the
> alternator at all, is there any possible way to get the belt on
> without loosening that big bolt on top? Really need to get a new one
> on so I can drive to work tomorrow. Appreciate any help, Happy 4th
> everyone.
>
> Dave
> #5968
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

---

YAHOO! GROUPS LINKS

•  Visit your group "DMCForum" on the web.
   
•  To unsubscribe from this group, send an email to:
   DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
•  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

---