Re: [DMCForum] Cooling problems.

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

It'll only idle high with a vac leak if the mixture has been adjusted to 
account for the extra air. It'll run lean and lumpy if CO is set with no 
vacuum leaks, then one occurrs

Martin

Marc Levy wrote:

> Your high idle problem may be related...  if you have
> air leaks, it will idle high...  it will also run
> lean, and lean = hot..
>
> Follow all of the procedures that have been discussed
> at nausea on the DML to find vacuum leaks.
>
> Are you using PURE antifreeze?  Did you mix it 50/50
> or buy the pre-mix stuff?

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.