RE: [DMCForum] Re: locks left/right
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Re: locks left/right



Dooooood... you have a floppy bellcrank ;)

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx]On
Behalf Of Andrew
Sent: Saturday, April 30, 2005 1:39 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Re: locks left/right


On Sat, 30 Apr 2005, Toby Peterson wrote:

> In regards to the bell crank wiper switch issues ... on Winged1 I found
> that the rivet that the crank pivots on was loose and allowed the bell
> crank to flop around a bit.

I definitely have floppy bellcranks.  (I don't believe I've ever gotten to
say that before.)  What exactly did you do to "redrive" the rivets?  I
looked over the bellcranks when I had them out but didn't see any obvious
way to tighten up the assembly.

-andrew


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated