Re: [DMCForum] Re: Stainless Frame Vs Galvanising.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Stainless Frame Vs Galvanising.



Pearce frames use a different type of weld, they will not crack like
the prototype SS frame did. The seems is where the frames cracked and
the Pearce frames are welded different.

Do you actually think Bryan Pearce and DMCH would sell faulty equipment
with all of todays lawsuits where everybody sues everybody?

Mark V


On Mar 3, 2005, at 1:51 PM, Videobob Moseley wrote:

>
> There are plenty of frames for sale you know,
> when I was at DMCH they had them stacked up all over the place.
> Why not use one of those if you need one?
> The frames we have had lasted for over 20 years, I am sure a new one
> will
> too.
> ...and since you have it out you can give it an extra coat for
> protection.
>
> Hey, I think the stainless frame is bad ass, but that's a lot of bread
> for
> something
> you can't really see or know is there.
> Besides, didn't the builders decide against using a stainless frame
> because
> it proved
> to not be as durable in the extreme cold weather and would crack?
>
> I think that if a new frame should be made, it should be something like
> carbon fiber
> or aluminum, or in a way to reduce the weight of the car.
>
> What is the weight difference of the stainless frame as compared to the
> stock?
>
> If I could do something radical, I would remake the frame and the
> underbody
> from carbon fiber - then you have done something wicked.
> Using today's composites and fibers, you could easily make the
> frameless car
> that
> DeLorean originally wanted to do.
>
> -VB
>
>> From: "Josh Porter" <joshp1986@xxxxxxxxx>
>> Reply-To: DMCForum@xxxxxxxxxxxxxxx
>> To: DMCForum@xxxxxxxxxxxxxxx
>> Subject: [DMCForum] Re: Stainless Frame Vs Galvanising.
>> Date: Thu, 03 Mar 2005 14:18:32 -0000
>>
>>
>> I think that is a great idea!! Someone needs to remanufacture the
>> frame in both Galvansed and Stainless.
>>
>> Josh
>>
>>  --- In DMCForum@xxxxxxxxxxxxxxx, "John Dore" <dmcjohn@xxxx> wrote:
>>>
>>> Hi all,
>>>
>>> On the subject of Galvanising DeLorean frames, I think there would
>>> definitely be a market for someone to remanufacture the DMC frame
>> in
>>> the style of the Pearce frame, in mild steel, galvanised and
>>> powdercoated. It would offer the great benefits of the Pearce frame
>>> such as the redesigned trailing arm attachment, greater strength
>> than
>>> the original, completely rustproofed (a galvanised and powdercoated
>>> frame should last at least 75 years before any rust shows through,
>>> probably even much longer than this!). In addition to these
>> benefits,
>>> it would look completely original, and should cost significantly
>> less
>>> that the Stainless version.
>>>
>>> Would Bryan Pearce consider doing this as he already has the
>> facility
>>> to remanufacture the frame? Have any of the major service centers
>>> considered a project like this?
>>>
>>> Thanks for any feedback!
>>>
>>> John
>>
>>
>>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated