[DMCForum] Re: FUEL TANK INNARDS QUESTION

["thebrave65" <ssawyer37@xxxxxxx>]

It was bent just at the part that goes into the breather tube.  The 
wire itself was straight.  From what I could tell, it was bent like 
this:  |_______

The "Water Willy" side of it was pushed up into the hose at the top 
of the tank and it has little vents in it.

Johnny
5518


> I that how it was shapped in the tank?  Where was the rubber end 
connected?
> 
> Greg
> 
> 
> 
> -----Original Message-----
> From: thebrave65 [mailto:ssawyer37@xxxx]
> Sent: Friday, February 18, 2005 8:22 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: FUEL TANK INNARDS QUESTION
> 
> 
> I meant to do that last night and forgot.  Thanx for reminding me 
> Mark.  It's there now.  It's not a great pic but you can see the 
> green rust.  I also bent the crap out of it so it's not quite the 
> shape it was while in the tank.
> 
> So do you think I should put this back in?
> 
> Johnny
> 5518

Yahoo! Groups Sponsor

Get unlimited calls to

U.S./Canada

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.