Re: [DMCForum] 24valve 3.0 PRV Heads?

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

>
>
> -----Original Message-----
> From: Christophe Vieira 


> 2) The engine mount is different (suspended), must keep the original
> one.

This is not a problem as the crank case is interchangable regardless of 
which flavour of PRV you look at.

> 2) The gearbox is almost on the side of the engine, not like the
> DeLorean.

This is all down to the bellhousing and the DeLorean Bellhousing is the 
same as a Renault 30 and will fit any PRV

Martin

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.