[DMCForum] alleged vandalism...

["timnagin" <timnagin@xxxxxxxxxxxxxx>]

Ah yes, I have seen these rivets and they can be a bitch to get out.  Is the
pole cemented into the ground?  If not, you could borrow the whole thing and
return it later after you figure it out.

Greg



-----Original Message-----
From: therealdmcvegas [mailto:dmcvegas@xxxxxxx]
Sent: Monday, January 24, 2005 1:09 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: useless info




Not these. It's square tubing, with holes already drilled. And some
sort of rivet that spreads out in 4 directions. Two rivets per sign,
and two signs per side.

Ideas? Would have asked this a long time ago, but the DML is kinda
funny when you start asking questions about how to vandalize public
property...

-Robert



--- In DMCForum@xxxxxxxxxxxxxxx, "Dave Stragand" <dave.stragand@xxxx>
wrote:
> They are usually held on with a hex head set screw...
>
> -----Original Message-----
> From: therealdmcvegas [mailto:dmcvegas@xxxx]
> Sent: Monday, January 24, 2005 2:51 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: useless info
>
>
>
> One step ahead of you! North Las Vegas has Gullwing Lane & DeLorean
Drive,
> and Las
> Vegas has DeLorean Circle. Gullwing Lane would have been even
cooler if they
> hadn't
> misspelled "BricklAND". Would have been neat, since both streets
cross it.
>
> If I can ever figure out how to tear those signs off the posts, I
swear I'll
> mount one to my
> front bumper in leu of a license plate.
>
> Any ideas?
>
> -Robert

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.