Re: [DMCForum] roof support.. was: Tampa tech session
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] roof support.. was: Tampa tech session



Walt I have a sample of the correct adhesive for sticking the metal
bracket back to the glass body.

Andrei

timnagin wrote:

>What exactly is Walter's procedure?  I recently saw a car with, I think,
>four small pop-rivets across the top of the rear piece.  They didn't really
>look large enough to do anything.
>
>Another owner and I were discussing drilling all the way through the rear
>support, through the fiberglass underbody, and install bolts.  I know about
>the interference issues with the T-panel and headliner.  Mine isn't lifting
>right now, and has tons of resin all over the place, but I am considering
>doing this while I am in there.
>
>What do you think?
>
>Greg
>
>
>
>-----Original Message-----
>From: Jack Stiefel [mailto:jackstiefel@xxxxxxxxxxxxxxxxxxx]
>Sent: Sunday, October 24, 2004 8:34 AM
>To: DMCForum@xxxxxxxxxxxxxxx
>Subject: RE: [DMCForum] Re: Tampa tech session
>
>
>
>I have a non working drivers side window and I believe I need the top of
>the t-panel lowered and screwed down per Walters directions.  I am not
>sure if those little projects can be done in conjunction with other
>projects.
>
>Jack
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>

>

Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated