Re: [DMCForum] Water pump replacement progress...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Water pump replacement progress...



Just order a new hex head drain plug from John Hervey and throw out
that stupid old drain plug and be done with it.

Mark V



On Saturday, October 16, 2004, at 12:36  AM, mw98gt wrote:

>
>
> I am moving along steady.  I am hoping to get it all back together
> tomorrow- if the parts I ordered from John Hervey arrive.
> Installing the silicone hose for the heater hose is a major PITA.
> Those nipples are huge!  It took like 10 methods and over an hour to
> get it on finally.  I ended up doing what I origianlly should have,
> remove the pipe and get it mated up outside the engine bay.
>
> I am going to head out in the morning and buy a torque wrench, I
> should have initially.  I dont want to overtighten anything.  If I
> find out that I have already overtightened the y-pipe bolts should I
> loosen and then torque it correctly or does it not matter once it is
> already overtorqued and nothing bad happened?
>
> The o-ring kit I bought has one for the cold start injector tube
> where it connects to the manifold, should I replace that or not
> bother?
>
> I ordered new bearings from John hervey for the idler pullies.  I
> have never changed out bearings and was wondering if I need
> anythings special to do it or any tips that I might need?
>
> Walt, what was the method you told me for putting new coolant in?  I
> drained at the motor so I am unsure how much I should need, but what
> were you tellin me you do?
>
> Finally, I would like to order that bit from snap-on.  The drain
> plug bit.  How do I describe it to them.  Is there a name for it so
> they know eactly what I am referring to?
>
> Misha
> #5197
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated