[DMCForum] Re: European CPR (Walt Coe)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: European CPR (Walt Coe)



Ask Louie Golden. He's running my spare Series 038 right now. Seems
very happy with it. I'm beginning to wonder if he'd even give it back
should I ever need it (which of course I won't if I stick with the
Motorcraft/Holley carb).

Series 038 is *SLIGHTLY* richer than Series 066. Biggest difference is
warm up time (about twice as long) and incredibly simple full throttle
advance. Everything else on his engine is unchanged (idle speed motor
is bypassed, but that of course has no effect on the road). We
adjusted his CO by ear. There's a possibility we adjusted it past
Lambda's ability to screw with the mixture, or a possibility his
Lambda isn't working properly anyway, because his car outperforms
every other DeLo I've ever ridden in. I maintain F series PRV's as
imported run in a perpetual state of fuel starvation.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "Walter Coe" <Whalt@xxxx> wrote:
>
> > My recommendation is to throw it away and
> replace the CPR with a European model.
>
> (Walt shaking his head...)  There you go again, Bill.  ;-)
> I doubt that you could put such a different CPR on a
> DeLorean and have it work without other substantial changes.
> The Lambda would be messed up.  The cat would probably glow
> and melt.  I'm sure your answer is to remove/bypass all that
> stuff.  Have you successfully done this to a typical bad
> running DeLorean? (I mean a stock DeLorean PRV)  And have it
> still run afterwards?
>
> Walt


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated