[DMCForum] Re: More ignition analysis

["cruznmd" <racuti1@xxxxxxxxxxxx>]

I want to measure the output of the pulse coil, not the ignition coil.

My digital meter may not have the response sensitivity required to 
measure the voltage pulses. An analog meter might be better but I've 
nothing to do but try.

--- In DMCForum@xxxxxxxxxxxxxxx, doctorDHD@xxxx wrote:
> Rich,
>  
> I don't think you will be able to measure the output of the 
ignition coil  
> pickup unless you use an oscilloscope.  It is just generating 
pulses for  the 
> ECU.  The only way you might be able to do it is if you measured a  
known good 
> one with the same meter and compared.
>  
> D²
> 
> 
> 
> 
> "Just Say  NO, to the COUCH POTATO!"®
> 
> To see how go to _www.tvpedaler.com_ (http://www.tvpedaler.com/)   
> 
> 
> 
> [Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.