[DMCForum] Re: Clutch Fork

From: "content22207" <brobertson@xxxxxxxxxxxx>
Date: Sun, 16 May 2004 17:14:40 -0000

Ah, now I understand. Imminently helpful parts manual makes it appear the fork pivots on that piece of sheet metal, which is what mine was doing based on the wear pattern. Also explains why one ear snapped off. I'll simply fashion a new one. Now, about that oil problem... Bill Robertson #5939 >--- In DMCForum@xxxxxxxxxxxxxxx, Marc Levy <malevy_nj@xxxx> wrote: > Is the little spring clip broken off of your fork? It > goes over the pivot. >

Yahoo! Groups Sponsor

Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Follow-Ups:
- RE: [DMCForum] Re: Clutch Fork
  - From: John Hervey
- Re: [DMCForum] Re: Clutch Fork
  - From: Marc Levy

References:
- [DMCForum] Clutch Fork
  - From: Marc Levy

Prev by Date: Re: [DMCForum] Old thinking from the young guy [was: banning, Sean, and Claude]
Next by Date: Re: [DMCForum] Re: Clutch Fork
Previous by thread: [DMCForum] Clutch Fork
Next by thread: Re: [DMCForum] Re: Clutch Fork
Index(es):
- Date
- Thread

Back to the Home of PROJECT VIXEN

Copyright ProjectVixen.com. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive DMCNews Mailing List Archive DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated