RE: [DMCForum] Re: Fuel system updates - help!! long long long...

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

J30R9 rated fuel injection hose has a working pressure of 100 lb's and a
bursting pressure of over 500 lb's. Can be found or ordered by any Auto
store. 14.5 Bar divided into 100lb's = Appx 7 bar. This is more than enough
to handle anything that the car will put out.
John Hervey
www.specialtauto.com




  -----Original Message-----
  From: Martin Gutkowski [mailto:martin@xxxxxxxxxxxxxx]
  Sent: Friday, May 14, 2004 4:03 AM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: Re: [DMCForum] Re: Fuel system updates - help!! long long long...


  Guys, if you're interested, we have our fuel pump and accumulator hoses
  made from an excellent flexible rubber fuel hose rated to 10 bar.
  Primary pressure in the K-Jet system is around 5-6 bar. Pressure ratings
  are extremely conservative - usually about a fifth of what the hose will
  actually take

  Martin

  Walter Coe wrote:

  > > Will the hose I purchased go that high? I have no clue.
  > But as long as
  > it can handle upto 100psi, I should be fine.




        Yahoo! Groups Sponsor
              ADVERTISEMENT





----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

    b.. To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.