Re: [DMCForum] Re: Bearing and Transmission questions, partiallyfor Mart
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Bearing and Transmission questions, partiallyfor Martin G:

Well between those of us who were ragging DMCH's "green" car down the
Houston raceway, we managed to break said pin. A lot of D's have trouble
shifting into second, and I've heard it's all down to this roll-pin. It
makes second feel very vague "like stirring porridge" said Dave, and on
the car we've just pulled the engien and tranny out of, you could go
from 1st to 2nd, but not 3rd to 2nd, as you say.


cruznmd wrote:

>I have replaced -one- wheel bearing...passenger side. I thought that
>was where the noise was coming from. I was wrong. :)
>I have another bearing coming for the driver's side. I hope that's it.
>I did not know about the roll pin for 2nd gear. I sometimes find the
>tranny difficult to downshift into 2nd gear, so I usually don't. It
>up-shifts into 2nd, smoothly. Thanks for the info.
>I'm pretty gentle on the tranny.



Yahoo! Groups Links

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive