RE: [DMCForum] Repairing the evaporator
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Repairing the evaporator

Aluminum will not weld correctly in an oxygen-rich environment.  It will
oxidize... that's why they use the helium in the welding.

-----Original Message-----
From: Andrei Cular [mailto:andreic@xxxxxxxxxxxxxxxxxx]
Sent: Tuesday, April 27, 2004 9:56 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Repairing the evaporator

> I have soldered aluminum before, but I'd want a lot of
> practice before soldering something like that.  You can't
> see how hot it's getting, and the melting point of the
> solder is just under that of aluminum.  Get it too hot, and
> all of it turns liquid.  I suggest finding an experienced
> a/c guy to do it.

I got a TIG but not being a part on my car I would be really hesitant to try
it.  However I do have a friend in Tampa that would probably do it for a
case of Guinness.



Yahoo! Groups Links

*      To visit your group on the web, go to:

*      To unsubscribe from this group, send an email to:

*      Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<> .

[Non-text portions of this message have been removed]

Yahoo! Groups Links

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive