[DMCForum] Re: Master/slave clutch cylinder replacements.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Master/slave clutch cylinder replacements.



I agree.

Then there's that pesky "money" thing.

On Advance Auto's page the part photo shows an integrated resevoir.
Not looking good.

--- In DMCForum@xxxxxxxxxxxxxxx, "Scott Mueller"
<scott.a.mueller@xxxx> wrote:
> When you replace a hydraulic component such as the Clutch Slave,
you should
> go ahead and replace the master cylinder too.
>
> You will then only have to flush and bleed the system one time.
>
> Scott
>
> -----Original Message-----
> From: cruznmd [mailto:racuti1@xxxx]
> Sent: Monday, April 12, 2004 11:59 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [spam] [DMCForum] Re: Bill R's clutch master cylinder X-
ref:
>
>
> Thanks.
>
> I am just not willing to rebuild mine. I haven't had a leak yet
from
> any hydraulic part I've replaced on the D, but every past piece
I've
> rebuilt blew out soon after.
>
> Not gonna do it.
>
> > > My question:
> > >
> > > Is the master cylinder threaded for an imperial or metric
> hydraulic
> > > line fitting? An American car that old probably didn't use
metric
> > > hardware. The cylinder may be identical, but it might have been
> > > tapped for a non-metric fitting.
> > >
> > > Am I making any sense?
> > >
> > > Rich A.
> > > #5335


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive