[DMCForum] slave cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] slave cylinder



For the love of Christ!

This is a horrible job. I've removed the fuel system for better
access. The heater system hoses are in the way and I'm not taking
them apart.

The line fitting has rusted to the line. I found out today, that the
stainless braided line doesn't replace the entire line. It goes from
the hard line at the cylinder to the hard line at the clutch. It
doesn't replace the whole thing so it's not going to do me any good
(beyond replacing the icky plastic). I'm going to have to cut the
hard line, flare it and re-fit it.

On top of that, I was flipping a fuel line out of my face, and I lost
my balance and yanked it right off of the banjo fitting!

Once this crap is done, I hope nothing else goes wrong before the
Spring Social.

Is anyone here going to that by-the-way?

Rich A.
#5335



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated