Re: [DMCForum] I hate rust
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] I hate rust



I believe the line that you'd cut is the hard line mounted on the trans.  The stainless clutch line attaches at the other end of that hard line.

Try removing the other end of the hard line from its mount.  You may be able to take the whole thing out.

-Dave
  ----- Original Message -----
  From: cruznmd
  To: DMCForum@xxxxxxxxxxxxxxx
  Sent: Thursday, April 08, 2004 6:20 PM
  Subject: [DMCForum] I hate rust


  I have spent most of the day trying to remove my clutch slave
  cylinder.

  The fitting has rusted to the line. I guess I'm going to have to cut
  it and re-flare the line.

  That, or buy the stainless line.



------------------------------------------------------------------------------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/
     
    b.. To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx
     
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated