Re: [DMCForum] Hot Start
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Hot Start



It is possible, I have not taken that connection apart yet. I would
still like to know which area of the system I pressure tested so I can
identify if the pressure is falling thru that portion of the system. If
I measured the primary, then it seems to be holding proper from what I
read in the manual (minimum 1.7 bar after 10 minutes sitting). If I
didnt measure primary, then do all I have to do is turn my tester around
to measure primary?

Samuel

jmpdmc7878 wrote:

>Samuel,
>
>Could this be the problem?   http://www.specialtauto.com/delorean-
>images/Prim-press-regulator-1.jpg   Especially if someone messed
>with the distributor, this link to John's site could be the answer. 
>Sorry I can't comment on your fuel pressure readings.  Hope you find
>a solution.
>
>                    
>                                             Jeff Porter
>                                               01678
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>

>



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive