Re: [DMCForum] Blasted RUST!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Blasted RUST!



Use a hotter torch...  Or cut it off with a grinder.


Andrei



----- Original Message -----
From: <ken@xxxxxxx>
To: <dmcforum@xxxxxxxxxxxxxxx>; <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, March 01, 2004 2:40 PM
Subject: [DMCForum] Blasted RUST!


> I am in the process of remove my old exhaust, EVERYTHING is off and done
>
> .
>
> Except! 1 blasted little spacer (I think it's a spacer)
>
> On the driver side, the manifold has one stud which has a bolt, then the
oil
> dip stick then a spacer?
>
> Well it seems that this spacer is the only thing holding on . all the
other
> places on the exhaust manifold move when I shake the manifold, except that
> one spot. so I am positive that this it the culprate.
>
> I drenched it with penetrating oil.  And tried heating it up with a torche
>
> Nothing seems to want to get this thing to let go
>
> Any suggestions?
>
> Thanks
> Ken
> 005541
> www.odoc.ca
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive