Re: [DMCForum] Bearing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Bearing

Well if it is bad you might as well change the other side and the fronts.
With the bearings and front tube I am wondering if your car ever spent some
time sitting in salt water.

If you like the screw driver trick check out harborfreight item # 41966-0VGA


----- Original Message -----
From: "cruznmd" <racuti1@xxxxxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Thursday, February 26, 2004 5:18 PM
Subject: [DMCForum] Bearing

The hub has slop. 6-9 months ago, I checked the diff lube level
before Bill, Mike and I put the tranny back in. As I only have one,
tiny oil drip that's not the case.

The hub has slop and makes the rubbing noise when I rotate the hub
with the wheel off. I used a screwdriver like you suggested and I
hear it. (good tip BTW)

I've called around, I found a shop willing to press it in, but I
couldn't get there before they closed.

The only consolation for me in all of this, is that the same thing
never breaks meaning everything I fix, I fix right. I had an old war
buddy who was expecting me to visit too. I've managed to piss off
just about everybody today so now my day is complete.

Yahoo! Groups Links

Yahoo! Groups Links

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive