RE: [DMCForum] VIN #0909 pics
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] VIN #0909 pics



Greg, When the proper hose is used there are no ties. Hear is a picture
showing the space between the belt and the hose. If it's not this amount or
more. The belt bounce will wear into the hose.
John Hervey
http://www.specialtauto.com/delorean-images/coolant-hose-pass.jpg

  -----Original Message-----
  From: timnagin [mailto:timnagin@xxxxxxxxxxxxxx]
  Sent: Sunday, February 22, 2004 6:01 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: RE: [DMCForum] VIN #0909 pics


  Yea, but I am pretty sure the white plastic wire ties holding the hoses
away
  from the belts and stuff was not OEM :)  That, and you can see the bolt
head
  broke off for the throttle spool bracket.

  This is the picture I am referring to -
  http://staff.xu.edu/~durman/delorean/pics/throttle_spool.JPG

  Greg


  -----Original Message-----
  From: DMCVIN6683 [mailto:dmcvin6683@xxxxxxxxx]
  Sent: Sunday, February 22, 2004 5:48 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: Re: [DMCForum] VIN #0909 pics


  The early model deloreans ran a different cooling hose configureation
  before vin #1234.

  Mark



----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

    b.. To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive