RE: [DMCForum] spark plug problem bad.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] spark plug problem bad.



That does indeed suck.  I would try to epoxy or JB Weld the piece back in
while making very sure not to get any in the combustion chamber.  After that
set up, then I would soak the threads for a day or so and see if it will
break loose.

Let us know how it turns out.

Greg


-----Original Message-----
From: jordan rubin [mailto:nuttenschleuder@xxxxxxxxx]
Sent: Sunday, February 08, 2004 9:35 AM
To: DMCFORUM
Subject: [DMCForum] spark plug problem bad.


Hello all,

I ask for the assistance of fellow delorean owners.
Perhaps you have seen this problem.


Upon removing the spark plug, the plug breaks bust
below the bolt, being able to remove the ceramic part
of the plug but leaving the metal screw part behind
and in tact.

please view the page of three pictures provided.

http://retroserver.no-ip.com/delorean/spark_plug_nightmare.html

does anyone know the best way to remove this.  The
threads should still be good, as in not stripped I
just need to loosen it out.

any answerrs would be helpfull

Jordan

11613



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated