Re: [DMCForum] steering geometry - new question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] steering geometry - new question



I worked out why earlier today - when measuring in degrees it doesn't
matter, but this blasted 3mm does!

Martin

Jim Strickland wrote:

>it sure would, unless you convert to degrees and adjust by using degrees.
>
>
>I'm sure the manual assumes that you have standard equipment - or at
>least a standard wheel diameter.  This is not really that unlikely, as
>you'd get thinner wall tires if they were on larger rims.  Otherwise your
>car might look funny and your speedometer/odometer would be all messed up
>too.
>
>This would also mean that moving to a larger rim (and staying at the same
>overall wheel diameter) wouldn't change the alignment.
>
>Jim
>

>



Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated