Re: [DMCForum] steering geometry - new question

["Andrei Cular" <andreic@xxxxxxxxxxxxxxxxxx>]

That's a good point.  If you have a 6" wheel and a 45" wheel and set both to
1/4 degree the distance between the leading and trailing edge will be
different assuming the same pivot point. But with toe you are interested in
where the edges are with respect to each other.

It's too early to be thinking about stuff like this...

Andrei


----- Original Message ----- 
From: "Martin Gutkowski" <webmaster@xxxxxxxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Thursday, February 05, 2004 4:59 AM
Subject: Re: [DMCForum] steering geometry - new question


> Why would the size of the wheel and tyre affect the angle it's pointing?
>
> Martin
>
> Jim Strickland wrote:
>
> >The numbers on K:08:02 in the conversion table are correct when measuring
> >the rim and the tire (measuring at the tread) for a standard 235/60R15
> >
> >Jim
> >
> >
> >
> >
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.