I used this on a truck I painted so my experience was on the paint and not bare metal. The guy that sold me the stuff said the smooth surface of the paint would not allow the urethane to properly adhere so it had to be primed. One thing I did learn the hard way not to use the primer on the glass. Almost zero stickage. Greg -----Original Message----- From: Andrei Cular [mailto:acular@xxxxxxxxxxxxxxx] Sent: Friday, December 26, 2003 2:32 PM To: DMCForum@xxxxxxxxxxxxxxx Subject: [DMCForum] Fixed Window Seal Has anyone replaced a fixed window in the door ? I am trying to put my driver window back but the butyl seal doesn't want to stick to the SS. I talked to an autoglass shop in town today and they said since something came out I shouldn't need to prime the metal, but make sure its clean. Well I cleaned it with acetone then denatured alcohol with no luck. I'm going to try track down some 3M urethane window adhesive and primer. Does anyone have any experience with it? Andrei _____ Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/DMCForum/ * To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .