Re: [DMCForum] Nonsense in DMCNEWS group

["Martin Gutkowski" <webmaster@xxxxxxxxxxxxxx>]

The ballast resistors are there to limit current, not voltage. The 
result is the coil draws very little current and the resulting voltage 
drop across the resistors is small.

Martin

content22207 wrote:

>- John H claims mere 10 volts into performance coil will burn it up.
>Not to be particular, but exact same coils are really designed for
>proprietary modules running off full 12-14 volts. They work fine with
>reduced voltage modules like ours, just don't produce as much HT.
>  
>




Yahoo! Groups Sponsor	 
 
<http://rd.yahoo.com/M=259395.3614674.4902533.1261774/D=egroupweb/S=170512
6215:HM/A=1524963/R=0/SIG=12o885gmo/*http://hits.411web.com/cgi-bin/autore
dir?camp=556&lineid=3614674?=egroupweb&pos=HM> 	 
 
<http://us.adserver.yahoo.com/l?M=259395.3614674.4902533.1261774/D=egroupm
ail/S=:HM/A=1524963/rand=661720432> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>