Actually K-jet is pretty unique as the idle adjustment screw and the mixture adjustment screw are one and the same thing. Martin content22207 wrote: >Thought you might be an old head just using a familiar term. On >carburetor screw(s) is/are idle mixture (fuel mixture at throttle >determined by metering jets). > >We all knew what you meant. > >Bill Robertson >#5939 > > > >>--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote: >>That's what I meant when I brought it up... mixture adjustment. I got my >>terms mixed up. >> >> >> >>>-----Original Message----- >>>From: Martin Gutkowski [mailto:webmaster@xxxx] >>>Sent: Wednesday, September 17, 2003 2:54 PM >>>To: DMCForum@xxxxxxxxxxxxxxx >>>Subject: Re: [DMCForum] Idle adjustment tool question >>> >>>If you go into a model shop that sells japanese RC cars, you can buy >>>some really neat (expensive) screwdriver-style allen keys. I >>> >>> >bought and > > >>>regularly use a 3mm one for mixture adjustment (NOT idle >>> >>> >adjustment!!!) > > >>>It's also really handy for getting the mirror switch out without the >>>innards going sproiiiinggg. >>> >>>Martin >>> >>>Walter Coe wrote: >>> >>> >>> >>>>>What size allen wrench is needed to adjust the idle mix screw? >>>>> >>>>> >>>>> >>>>> >>>>Like Samuel said, mine is a long T-handle that was part of a set. >>>> >>>> > They > > >>>are >>> >>> >>>>common at Sears, NAPA, Snap-On, etc. The one you need is a 3mm. You >>>> >>>> >>>could >>> >>> >>>>buy just one, but it is really handy to have the whole set. I >>>> >>>> >use the > > >>>5mm >>> >>> >>>>to get cold start valves off. >>>> >>>>Walt >>>> >>>> >>>> >>>> >>> >>>[Non-text portions of this message have been removed] >>> >>> >>> >>>To unsubscribe from this group, send an email to: >>>DMCForum-unsubscribe@xxxxxxxxxxxxxxx >>> >>> >>> >>>Your use of Yahoo! Groups is subject to >>> >>> >http://docs.yahoo.com/info/terms/ > > > >To unsubscribe from this group, send an email to: >DMCForum-unsubscribe@xxxxxxxxxxxxxxx > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > >. > > > [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512 6215:HM/A=1706996/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code= 30509&media=atkins> click here <http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm ail/S=:HM/A=1706996/rand=542883661> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN