[DMCForum] "Idle Mixture" vs "Fuel Mixture"
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] "Idle Mixture" vs "Fuel Mixture"



Thought you might be an old head just using a familiar term. On
carburetor screw(s) is/are idle mixture (fuel mixture at throttle
determined by metering jets). 

We all knew what you meant. 

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> That's what I meant when I brought it up... mixture adjustment. I got my
> terms mixed up.
> 
> > -----Original Message-----
> > From: Martin Gutkowski [mailto:webmaster@xxxx]
> > Sent: Wednesday, September 17, 2003 2:54 PM
> > To: DMCForum@xxxxxxxxxxxxxxx
> > Subject: Re: [DMCForum] Idle adjustment tool question
> > 
> > If you go into a model shop that sells japanese RC cars, you can buy
> > some really neat (expensive) screwdriver-style allen keys. I
bought and
> > regularly use a 3mm one for mixture adjustment (NOT idle
adjustment!!!)
> > It's also really handy for getting the mirror switch out without the
> > innards going sproiiiinggg.
> > 
> > Martin
> > 
> > Walter Coe wrote:
> > 
> > >>What size allen wrench is needed to adjust the idle mix screw?
> > >>
> > >>
> > >
> > >Like Samuel said, mine is a long T-handle that was part of a set.
They
> > are
> > >common at Sears, NAPA, Snap-On, etc.  The one you need is a 3mm.  You
> > could
> > >buy just one, but it is really handy to have the whole set.  I
use the
> > 5mm
> > >to get cold start valves off.
> > >
> > >Walt
> > >
> > >
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> > 
> > 
> > 
> > To unsubscribe from this group, send an email to:
> > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1706996/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.cfm?code=
30509&media=atkins> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1706996/rand=751014943> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated