Re: [DMCForum] Next topic: Wheel bearings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Next topic: Wheel bearings



On 19-08-2003 19:57, cruznmd wrote:

> The front wheel bearings don't look like what
> I was expecting. (I was browsing the DMCH website).
> These look like sealed bearings or something.
> 
> Can they be re-packed or not?

In my experience; not broken? Don't touch...

I had the "luck" of having one wear out on me within 300 mi!
That actually was the 3rd I had to put in within about a year.
But as that's been more than a year now I'm not complaining.

These are actually a double ball bearing, with one outer
body and two inner rings with separate balls in between.

Since these are ball bearings they cannot be adjusted like
a cone bearing linke on LOTS of other cars.
The only "SORT OF" adjustment is the compression of the two
inner rings, but the width of those should be about the same
as the space you'll have on the spindle, so it's practically
none existent...

If you DO want to tackle the bearings make sure the D-washer
doesn't catch on the threads, else the bearing will have play
in it from the start (been there, done that).
What caused mine to wear out that rapidly turned out to be
the top hat seal/spacer between the bearing and the knuckle,
on the spindle. This had worn because of the initial bearing
failure and left too much space for the bearing on the spindle.
The D-washer would be up against the spindle and the bearing
would still have some play...

Fixed it with an extra washer/filler on the inside of
the spacer and it's been Okay ever since (knock on wood)...

JAN van de Wouw

Thinking Different...   Using a Mac...
Living the Dream...   Driving a DeLorean...

#05141 "Dagger" since Sept. 2000
--------------------------------



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=170512
6215:HM/A=1595053/R=0/SIG=124gf29oe/*http://ashnin.com/clk/muryutaitakenat
togyo?YH=3707890&yhad=1595053> Click Here!	
 
<http://us.adserver.yahoo.com/l?M=244522.3707890.4968055.1261774/D=egroupm
ail/S=:HM/A=1595053/rand=198965387> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> . 

<<attachment: winmail.dat>>



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated