I am way, way out of practice on any CAD stuff but it shouldn't take very long to create it really. You can produce stuff in SLA that quick and cheap? Damm... you need to be making and selling stuff, and loaning your SLA time out for other business. But I am sure pricing and stuff has changed since I was involved with that. Greg -----Original Message----- From: Andrei Cular [mailto:acular@xxxxxxxxxxxxxxx] Sent: Thursday, June 26, 2003 9:07 PM To: DMCForum@xxxxxxxxxxxxxxx Subject: Re: [DMCForum] fuse block options The method I use is to pull a temporary mold off of an existing fuse block. Then clean up the mold and beable to get maybe 20-50 parts out of it. If you want something professionally made using a stereo lith or SLA or SLS process and if someone could provide me with a CAD file of the part I can have one on your door in about 3 days. It would probably cost about $200. If I have to do the CAD work it will be about 2 years at the rate I am getting non-profit DeLorean work done. Andrei ----- Original Message ----- From: "Timnagin" <timnagin@xxxxxxxxxxxxxx> To: <DMCForum@xxxxxxxxxxxxxxx> Sent: Thursday, June 26, 2003 8:23 PM Subject: RE: [DMCForum] fuse block options > There is a company where I live who does this. At a previous employer we > had some samples made, very quickly I might add, to have a car ready for > demonstration to Detroit bigwigs. We had two made, and if I remember > correctly they were about $5,000.00 a piece. This is why I have not been > very quick to call them but I could. > > Greg To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3313099.4604523.1261774/D=egroupweb/S=170512 6215:HM/A=1595053/R=0/SIG=124orar12/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3313099&yhad=1595053> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3313099.4604523.1261774/D=egroupm ail/S=:HM/A=1595053/rand=905305981> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN