Does anybody know how to remove the air inlets at the back? Yesterday I was trying to replace one of the air inlets (Part no 105515) because it was broken on one side and I also wanted the fix the powerantenna that's inside. I figured out that it was somehow glued to the panel on one side and to the side window on the other side. So I pushed that thing REAL hard for about 20 minutes but wouldn't move. Is there a trick? And what is the best stuff to glue the replacement on? Second question: where are the 3 wires from the power antenna going on 82 and 83 models? My radio works. But the antenna is not moving. Third question: The housing of my LH outside mirror is a little loose. So it shakes whenever I'm driving. Makes me very dizzy... I removed the plastic cap from the base part but everything looked OK there. So I was wondering if there is a screw inside the mirror to tighten it? And how do I remove the mirrorglass itself? I hope it's not glued-on? Thanks! Ryan & 16216 [Non-text portions of this message have been removed] Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=245454.3115308.4434529.1261774/D=egroupweb/S=170512 6215:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei> <http://us.adserver.yahoo.com/l?M=245454.3115308.4434529.1261774/D=egroupm ail/S=:HM/A=1457554/rand=862299181> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN